Audio-Technica AT-MONO 3/LP Phono Cartridge

Made specifically for mono recordings on vinyl records, this moving coil cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/LP also has an adapted vertical compliance.

• Carefully selected component and state of the art technology produce a high resolution cartridge.

• Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.

• The average usage time is 500 hours extending the life span of precious mono recordings.

• High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity.

• To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.

Type	Moving Coil
Frequency Response	20 to 20,000 Hz
Coil Impedance	40 W (1 kHz)
DC Resistance	40 W
Vertical Tracking Angle	23 degrees
Recommended Load Impedance	400 W to 47,000 W
Coil Inductance	190 mH (1 kHz)
Static Compliance	20 x 10 – 6 cm / dyne
Dynamic Compliance	7 x 10 – 6 cm / dyne (100 Hz)
Output Voltage	1.2 mV (at 1 kHz, 5.0 cm/sec)
Stylus Shape	Conical
Cantilever	Aluminium Pipe
Stylus Construction	0.6 mil
Mount	1/2” centers
Dimensions	16.0 (H) x 16.6 (W) x 26.5 (L) mm
Weight	6.8 g
Accessories	Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101

Note: This model is not compatible with 78rpm shellac records

All our cartridges are genuine UK stock and come with full manufacturer's warranty

We supply the full range of Audio Technica cartridges - if  you do not see what you want please Contact Us with your requirements.

UK carriage for this item is FREE