Goldring E3 Stereo Moving Magnet Phono Cartridge
The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear.
The E Series is designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of Magnetic Duplex Technology and Goldring Expert Adjustment.
The E3 cartridge, the highest in the range features the same aluminium cantilever as the E2, but benefits from a superior bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it superior high frequency groove detail retrieval ability over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) styli due to its smaller front to back radius. Its main effect is the reduction of sibilance, especially in high level vocal recordings.
Colour |
Violet |
Cantilever |
Aluminium |
Stylus profile |
Elliptical |
Stylus radius |
0.3 x 0.7 mil |
Transducer Characteristics |
|
Frequency range |
20 Hz - 20 kHz |
Channel balance |
1.5 dB at 1 kHz |
Channel separation |
>20 dB at 1 kHz |
Sensitivity |
3.5 mV (1 kHz @ 5 cm/sec) |
Static compliance |
20 mm/N |
Vertical tracking angle |
208 |
Electrical Characteristics |
|
Load resistance |
47 kOhm |
Load capacitance |
100 - 200 pF |
Internal inductance |
400 mH |
Internal resistance |
410 Ohm |
Mechanical Characteristics |
|
Cartridge mass |
6.9 g |
Fixing centres |
12.7 mm (0.5 in) |
Playing weight |
1.5 g - 2.5 g (2.0 g recommended) |
All our cartridges are genuine UK stock and come with full manufacturer's warranty
We supply the full range of Goldring cartridges - if you do not see what you want please Contact Us with your requirements.
Carriage for this item is calculated at the checkout
 |