• Ortofon Hi-Fi Test Record

Christmas Holidays

We will be closed for Xmas from noon 24th December until 6th January 2025. Orders placed during this period will be processed as soon as we're back. Meanwhile we wish all our customers past and present a very Happy New Year and thank you for choosing us - we're looking forward to seeing you again in 2025!

Ortofon Hi-Fi Test Record

Ortofon’s new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analysing cartridge performance as well as its interaction with your tonearm and turntable. Before testing your cartridge, please verify the HiFi system’s functionality. The left speaker should be connected to the left amplifier channel and vice versa; both speakers should work in phase and be optimally positioned in the room.

The Test Record is designed to be played through your system with in-built RIAA equalisation. Volume control is recommended to be set at a moderate signal level.
Please refer to your turntable and tonearm’s instructions for correct installation and alignment, adjust tonearm to be parallel to record surface, set Vertical Tracking Force and anti-skating according to the cartridge’s recommended technical data, and adjust stylus overhang.


Track Listing

    Each side of the record consists of 15 tracks which have been cut from 1-4 and 5-15:
    1. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
    2. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
    3. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
    4. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
    5. Reference tone 1000 Hz 5 cm/sec rms Left
    6. Reference tone 1000 Hz 5 cm/sec rms Right
    7. Reference tone 1000 Hz 5 cm/sec rms Left
    8. Reference tone 1000 Hz 5 cm/sec rms Right
    9. Tracking ability, lateral 50 μm peak
    10. Tracking ability, lateral 60 μm peak
    11. Tracking ability, lateral 70 μm peak
    12. Tracking ability, lateral 80 μm peak
    13. Tracking ability, lateral 90 μm peak
    14. Tracking ability, lateral 100 μm peak
    15. Square Wave Form 2.7 msec duty cycle 3:7
    * The record has a constant velocity amplitude throughout the sweep.
1-4 Frequency sweep – a tool for checking frequency response:
There are several factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the cartridge loading, a better overall frequency response can be achieved. Considering the above the signal must be clean throughout the sweep.

5-8 Reference tone for testing channel output:
With this standard reference signal is it possible to check the correctness of the connections of the left and right channels, channel balance and speed of the turntable.

9 -14 Tracking ability test, 315 Hz lateral modulation:
These tracks contain a 315 Hz signal, recorded at increasing pick amplitudes of 50, 60, 70, 80, 90 and 100 micrometers. Please refer to your cartridge’s tracking ability value specified in the technical data sheet. Your cartridge should be able to track the actual level without audible distortion. Inability to track can be heard as a departure from a pure tone or a sputtering and intermittent tone. To determine if it is one or both channels, the balance control can be utilised. In case of differing tracking ability in the left and right channels it is probably necessary to readjust the anti-skating correction of the tonearm. If both channels fail to track properly, then vertical tracking force should be increased until no further improvement of tracking force can be obtained. 

15. Square Wave Form 2.7 msec duty cycle 3:7:
When monitoring the output of your cartridge with an oscilloscope you’ll then see a square wave located precisely above each other if the connection from the cartridge is correct.

Carriage for this item is calculated at the checkout

PayPal Acceptance Mark


Write a review

Note: HTML is not translated!
    Bad           Good

Ortofon Hi-Fi Test Record

  • Product Code: HD 1008
  • Availability: In Stock
  • £40.00


Tags: ortofon, hi-fi, test record, tonearm, phono, cartridge, turntable, alignment, set up